Ipari ajtók
Not only freezer rooms and chiller rooms require solid doors in the industry plants. Other rooms should also be equipped with specifically designed doors, quite different from the standard solutions available on the market. The designs of our industrial doors are based on the long-term experience, both from the point of view of the door user and the door producer. All, even the smallest industrial doors, are separately designed for the specific door niche. We offer almost countless number of dedicated solutions for doorframes, door panels and optional equipment.
Hinged, single leaf doors
Door panel: They can be made of stainless steel, coated steel or painted according to RAL palette. The door panels can be constructed as rebated panels or as non-rebated panels. They are always filled with highly compressed polyurethane foam that provides exceptional rigidity and lightness. All the reinforcements inside the door panels are made of stainless steel. The thickness is 40 mm.
Sealing: Pressed black EPDM rubber seal. Optional white silicone seal.
Hinges: Depending on the weight of the door leaf, we use two or three stainless steel hinges (steel grade 304). They can be produced in straight or oblique (up-down or tightening) versions. The mounting holes of the hinges in the non-rebated doors are not visible.
Latches: Stainless steel door handle with round rosettes and key-lock, as a standard. Optionally, other types of door handles, anti-panic locks, roller locks, electric lock and other solutions tailored to the user’s needs.
Galéria
opcionális kiegészítők
videók
tokok
 |
Glazing - combined pane in the frame made of stainless steel. |
 |
External door, door panel painted according to RAL palette. Glazing in the frame made of stainless steel- sandblasted pane according to specific patterns. |
 |
Doorframe comprising hinged industrial door. |
 |
Plastic glazing in the rubber seal frame. |
 |
Lower cover of the industrial door. This can be done as a full cover or in the form of a flat slat. |
 |
Self-closing mechanisms |
| Anti-panic locks | |
|
|
Threshold for the external doors installed with the oblique, tightening hinges (threshold filled with concrete in our factory) |
Rebated doors
The rebated door - door panel is partially recessed in the doorframe and partially covers the doorframe. The rebated door requires only 66 mm of the allowance in the door niche in order to obtain the specific clearance of the door. When the door is opened at an angle of 90°, the door panel does not go into the door clearance. They are always filled with highly compressed polyurethane foam that provides exceptional rigidity and lightness. All the reinforcements inside the door panels are made of stainless steel. The thickness is 40 mm.
Műszaki jellemzők:
összeszerelés
tokok
Installation space for industrial hinged doors
.jpg)
Brick wall - drill through installation
.jpg)
Full brick wall installation with glazing on the sides and back corner stainless steel profile.
Sandwich panel installation with optional panel cover.
The CH-type angle doorframes are used in the industrial doors. The final selection of the doorframes depends on the installation conditions, we therefore try always to satisfy the customer’s needs. Our offer contains several types of doorframes, including block doorframes. Each doorframe is filled with polyurethane foam and equipped with special stainless steel reinforcements, which ensure the durability and rigidity of the construction. The doorframes can be optionally integrated with stainless steel thresholds (external doors or installed wherever the flooring is uneven).
.jpg)
ANGLE FRAME OF INDUSTRIAL HINGED DOORS
BLOCK FRAME OF INDUSTRIAL HINGED DOORS
Non-rebated doors
The door panel is completely hidden in the doorframe, forming a uniform plane. When the door is opened at an angle of 90°, the door panel goes into the door clearance, therefore, more mounting space should be foreseen in order to obtain the specific passage clearance than in case of the rebated door.
Műszaki jellemzők:
tokok
Door panel:
- EPDM rubber seal
- panel thickness - 40mm
- handle with key-lock
- straight stainless steel hinges
- filling with 50kg/m3 polyurethane foam under high pressure
- top quality
- surface: stainless steel, coated steel or painted steel
CH-type angle doorframes
- angle construction ensures the best fastening
- filling with polyurethane foam
- optional flashing in case of the installation on sandwich panels
The CH-type angle doorframes are used in the industrial non-rebated doors. The final selection of the doorframes depends on the installation conditions, we therefore try always to satisfy the customer’s needs. Our offer contains several types of doorframes, including block doorframes. Each doorframe is filled with polyurethane foam and equipped with special stainless steel reinforcements, which ensure the durability and rigidity of the construction. The doorframes can be optionally integrated with stainless steel thresholds (external doors or installed wherever the flooring is uneven).
angle frame of inside frame industrial doors
block frames of inside frame industrial doors
Hinged, double leaf doors
The industrial hinged double-leaf doors are the equivalent of the single-leaf doors, but this type of the doors is used in the wider door niches. Just as the single-leaf doors, these doors are also equipped with the locks. The handles and doorplates are made of aesthetically ground stainless steel.
Door panel: They can be made of stainless steel, coated steel or painted according to RAL palette. The door panels can be constructed as rebated panels or as non-rebated panels. They are always filled with highly compressed polyurethane foam that provides exceptional rigidity and lightness. All the reinforcements inside the door panels are made of stainless steel. The thickness is 50 mm.
Sealing: Pressed black EPDM rubber seal. Optional white silicone seal.
Hinges: Depending on the weight of the door leaf, we use two or three stainless steel hinges (steel grade 304). They can be produced in a straight or oblique (up-down or tightening) version. The mounting holes of the hinges in the non-rebated doors are not visible.
Latches: Stainless steel door handle with round rosettes and key-lock, as a standard. Optionally, other types of door handles, anti-panic locks, roller locks, electric lock and other solutions tailored to the user’s needs.
Galéria
opcionális kiegészítők
videók
tokok
|
|
Glazing - combined pane in the frame made of stainless steel. |
|
|
External door, door panel painted according to RAL palette. Glazing in the frame made of stainless steel- sandblasted pane according to specific patterns. |
|
|
Doorframe comprising hinged industrial door. |
|
|
Plastic glazing in the rubber seal frame. |
|
|
Lower part of the industrial doors. This can be done as a full cover or in the form of a flat slat. |
|
|
Self-closing mechanisms |
| Anti-panic locks | |
|
|
Threshold for the external doors installed with the oblique, tightening hinges (threshold filled with concrete in our factory) |
Rebated doors
The rebated door - door panel is partially recessed in the doorframe and partially covers the doorframe. The rigid and massive construction equipped with the hinges with visible bolts. The rebated door requires only 66 mm of the allowance in the door niche in order to obtain the specific clearance of the door. When the door is opened at an angle of 90°, the door panel does not go into the door clearance.
Műszaki jellemzők:
összeszerelés
tokok
Installation space for industrial hinged doors
Brick wall - drill through installation
Full brick wall installation with glazing on the sides and back corner stainless steel profile.
Sandwich panel installation with optional panel cover.
Non-rebated doors
The door panel is completely hidden in the doorframe, forming a uniform plane. When the door is opened at an angle of 90°, the door panel goes into the door clearance, therefore, more mounting space should be foreseen in order to obtain the specific passage clearance than in case of the rebated doors.
Műszaki jellemzők:
tokok
Door panel:
- EPDM rubber seal
- panel thickness - 50mm
- handle with key-lock
- straight stainless steel hinges
- filling with 50kg/m3 polyurethane foam under high pressure
- top quality
- surface: stainless steel, coated steel or painted steel
CH-type angle doorframes
- angle construction ensures the best fastening
- filling with polyurethane foam
- optional flashing in case of the installation on sandwich panels
The CH-type angle doorframes are used in the industrial non-rebated doors. The final selection of the doorframes depends on the installation conditions, we therefore try always to satisfy the customer’s needs. Our offer contains several types of doorframes, including block doorframes. Each doorframe is filled with polyurethane foam and equipped with special stainless steel reinforcements, which ensure the durability and rigidity of the construction. The doorframes can be optionally integrated with stainless steel thresholds (external doors or installed wherever the flooring is uneven).
angle frame of inside frame industrial doors
block frames of inside frame industrial doors
Sliding, single leaf doors
The work in food processing plants is a continuous struggle against time, the products must be delivered fresh and on time to the final consumer. The chillers and freezers must be tightly closed by the hygienic doors. However, there is a number of other, not refrigeration rooms, but not less important, e.g. production areas. It is not an absolute hygiene that matters here, but also reliable performance of the doors, often 24 hours a day. Jest as the hinged doors, the sliding industrial doors are made of the best materials, and their construction is adjusted to the intensive operation. For example, the most often used sliding rail is almost the same as the one, used in the heavier chiller doors. The construction of the doorframes is very similar, but a little bit narrower in fact, however, the insulation is made of the same dense polyurethane foam of the best quality.
Műszaki jellemzők:
Galéria
opcionális kiegészítők
videók
tokok
The sliding industrial doors are intended for the rooms with the temperatures ranging from +5 to +15 degrees Celsius. The doors can be made of stainless steel, coated steel or painted according to RAL palette. Due to the use of the up-down and tightening sliding rail system, they doors can be installed as the external doors. Each door is individually designed to ensure the durability and pleasant operation for many years.
Door panel: Made of 0,8 mm stainless steel or 0,75 mm coated steel. The standard thickness of the door panel is 37 mm. The door panels of envelope structure are welded in the corners and form therefore solid and hygienic constructions, made with great attention. There are stainless steel reinforcements installed inside the door panels!!! The doors, wider than 180 cm and higher than 230 cm, are equipped with the combined pusher. Probably, as the only producer of the specialist doors, we spot steel on our own (round and strip spotting). Thus, our customers can freely select doors that most correspond to their tastes.
 |
 |
 |
 |
| round mazeration | line mazeration | smooth steel | brushed steel |
Sealing: The two-component rubber seal in a special profile around the perimeter of the door. This solution eliminates the thermal bridge of the door panels. The lower part of the seal is hard and ensures a solid fit. The upper part is soft, adjoins the doorframe, ensuring a good tightness and light work of the door. The door bottom is sealed by a durable, full rubber seal.
We always recommend using the stainless steel threshold, levelling the floor and giving a good base for the lower seal, in the external doors.
Sliding rail: Classical, stainless steel rail with cover or stainless steel pipe rail
Latches (option): Classical lock, safe lock, reverse-operation lock
Door pusher: Combined pusher outside and inside, optionally
 |
Glazing for industrial door in the rubber seal. Glazing available in the stainless steel frame |
 |
safety lock for sliding door |
 |
safety lock for sliding door |
| reverse-operation lock | |
| automatic door system for sliding door | |
| flat door bumper | |
 |
stainless steel threshold for industrial door |
 |
stainless steel panel or brick wall cover |
  |
combined pusher outside / inside |
The CH-type angle doorframes are used in the industrial doors. The final selection of the doorframes depends on the installation conditions, we therefore try always to satisfy the customer’s needs. Our offer contains several types of doorframes, including block doorframes. Each doorframe is filled with polyurethane foam and equipped with special stainless steel reinforcements, which ensure the durability and rigidity of the construction. The doorframes can be optionally integrated with stainless steel thresholds (external doors or installed wherever the flooring is uneven).
Classical sliding rail
The classical sliding system is a standard rail. The construction, refined over time, is made entirely of stainless steel. The system cover of the door with the classical sliding rail is made of the same material as the door panel. The polyethylene rollers are specially designed to provide a quiet operation and the durability of the door.
Műszaki jellemzők:
Pipe sliding rail
The pipe rail system consists of aesthetically brushed stainless steel pipe and two large, specifically profiled guide rollers. Due to the special profile of the rollers and the pipe, just as in the classical system, the door falls down and pushes to the doorframe, while closing.
Műszaki jellemzők:
Sliding, double leaf doors
The industrial sliding double-leaf doors are the equivalent of the single-leaf doors, but this type of the doors is used in the wider door niches or wherever there is no enough space to use a single door panel. The double-leaf construction is also a practical solution for the doors for the tubular track. The sealing, installed between the door panels, absorbs the contact of the door leaves when closing at the same time.
Műszaki jellemzők:
opcionális kiegészítők
videók
tokok
The sliding industrial doors are intended for the rooms with the temperatures ranging from +5 to +15 degrees Celsius. The doors can be made of stainless steel, coated steel or painted according to RAL palette. Due to the use of the up-down and tightening sliding rail system, they doors can be installed as the external doors. Each door is individually designed to ensure the durability and pleasant operation for many years.
Door panel:
Made of 0,8 mm stainless steel or 0,75 mm coated steel. The standard thickness of the door panel is 37mm. The door panels of envelope structure are welded in the corners and form therefore solid and hygienic constructions, made with great attention. There are stainless steel reinforcements installed inside the door panels!!!
The doors, wider than 180 cm and higher than 230 cm, are equipped with the combined pusher.
Probably, as the only producer of the specialist doors, we spot steel on our own (round and strip spotting). Thus, our customers can freely select doors that most correspond to their tastes.
|
|
|
|
|
| round mazeration | line mazeration | smooth steel | brushed steel |
Sealing: The two-component rubber seal in a special profile around the perimeter of the door. This solution eliminates the thermal bridge of the door panels. The lower part of the seal is hard and ensures a solid fit. The upper part is soft, adjoins the doorframe, ensuring a good tightness and light work of the door. The door bottom is sealed by a durable, full rubber seal.
We always recommend using the stainless steel threshold, levelling the floor and giving a good base for the lower seal, in the external doors.
Sliding rail: Classical, stainless steel rail with cover or stainless steel pipe rail
Latches (option): Classical lock, safe lock, reverse-operation lock
Door pusher: Combined pusher outside and inside, optionally
|
|
Glazing for industrial door in the rubber seal. Glazing available in the stainless steel frame |
|
|
safety lock for sliding door |
|
|
safety lock for sliding door |
| reverse-operation lock | |
| automatic door system for sliding door | |
| flat door bumper | |
|
|
stainless steel threshold for industrial door |
|
|
stainless steel panel or brick wall cover |
Doorframes: The CH-type angle doorframes are used in the industrial doors. The final selection of the doorframes depends on the installation conditions, we therefore try always to satisfy the customer’s needs. Our offer contains several types of doorframes, including block doorframes. Each doorframe is filled with polyurethane foam and equipped with special stainless steel reinforcements, which ensure the durability and rigidity of the construction. The doorframes can be optionally integrated with stainless steel thresholds (external doors or installed wherever the flooring is uneven).
Classical sliding rail
Classical sliding rail - Standard system, refining over the years design, made entirely of stainless steel. Classical sliding rail has the cover made of the same material as the door leaf. Polyethylene rollers are specially designed to provide quiet operation and durability of the door. During closing the door go down and tighten the frame.
Pipe rail system
Pipe sliding rail is constructed of aesthetically brushed stainless steel pipe and two large especially shaped PE black rolls. Special shaping of the tube causes that the rollers fall down and tightened the frame during closing.
Lap tetejére
